Brooks, Models bm01 and bm02 – Brooks Instrument BM02 User Manual
Page 21
4-1
Installation and Operation Manual
X-PD-BM01-02-eng
Part Number: 541B042AHG
March, 2008
Maintenance
Brooks
®
Models BM01 and BM02
4-1 General
No routine maintenance, cleaning or lubrication is required on the flowmeter.
The user should establish a schedule for the periodic checking and cleaning
of the strainer. Cleaning the strainer depends upon product application and
time of use.
4-2 Manufacturer's Maintenance Recommendations
The following items apply to all flowmeters. Users must give careful
consideration to the consequences that may be the result of failure to
follow manufacturer’s recommendations.
1. No attempt should be made by the user to alter any physical dimension
of the flowmeter or component part.
2. Do not use force to assemble or disassemble any component of the
flowmeter. All components are machined to exact tolerances.
3. When an unserviceable flowmeter has been returned to the factory for
rework, it must be understood that in extreme cases it may be eco-
nomically impractical to repair the flowmeter.
4. Rotors are manufactured as a subassembly and are available as replace-
ment parts, or spare parts.