Flowline LI90 Commander - Manual (Page 42)

42 of 57 PRELIMINARY MANUAL 27 AUG 08
Commander LI90 Series Rev 1_3
• Empty Setting – This is the display value when the tank is empty
• Full Setting – This is the display value when the tank is full
• Use the Next soft key to advance to the next setting
• Use the Back soft key to return to the previous setting
Scaled 4-20 mA Output Fixed 4-20 mA Output
o
To change a value, first press the Enter key
• The value will be highlighted
• Use the 10-digit keypad to enter the desired value
• I.e. for 123.4, press the following keys: , , , <. >,
,
• Press Enter when completed to store this value to memory.
• Follow the sequence above:
• 1. Press Enter to begin
• 2. Press F1 for number 1
• 3. Press F2 for number 2
• 4. Press F3 for number 3
• 5. Press ▼ for “.”
• 6. Press F4 for number 4
• 7. Press Enter to save setting
• The screen cannot change until a value is stored in memory.