Flowline LI90 Commander - Manual (Page 22)

22 of 57 PRELIMINARY MANUAL 27 AUG 08
Commander LI90 Series Rev 1_3
• General (Open Functions)
o
Opening Screen indicates the Level of Liquid in the tank/vessel along with the
true analog (4-20 mA) input for channel #1 and the status of Relay #1
• Regardless on how the input level is configured, the bar graph will show
the true 4-20 mA input provided by the sensor
o
Pressing the Lower Right Soft key will jump the display to a screen showing the
same information for Channel #2.
o
Pressing the lower Right soft key will continue to Channels #3 and #4 and then
the Relay Status Page
• Sequence is as follows:
• Channel 1, Channel 2, Channel 3, Channel 4, Relay Info, Channel
1, …
Channel 1 Channel 2 Channel 3
Channel 4 Hand/Off/Auto (HOA)
o
In the Relay Info screen, pressing the upper left soft key will jump the screen to
the HAND / OFF / AUTO (H.O.A.) functions for each relay.