Flowline LU27 EchoSonic II User Manual
Page 7
7
The Advanced button is used for options available when setting up the sensor with special,
non‐standard features. Many of these features are available for specific applications that
may change from time to time. Consult WebCal's HELP file for the latest information on
the use of any of these features.
The more commonly used Advanced features
are the Invert Relay and Increase Output
Filtering described below.
Increase Output Filtering. Select this radio
button to add additional filtering to the 4‐20
mA output.
Decrease Output Filtering. Select this radio
button to remove all output filtering on the
4‐20 mA output.
Advanced Settings
Before configuration can be completed:
You must click the Write to Unit button to save the settings to the unit.
Then, click Wiring Diagram for a hard copy of the sensor’s settings.
Finally, enter the file name under which you wish to save the configuration file and
click Save Config File.
Configuration is now complete.
Disconnect the USB Fob before continuing to the next step: Mounting the EchoSonic® II.
For updates to WebCal, or to make sure you’re using the most up‐to‐date version available,
click the Update tab on the top of the WebCal screen.