EXP Computer Portable Slim CD_DVD_CDRW Drive - Manual (Page 9)

9
• A computer with a Firewire port
• Windows 98,SE, ME, XP or 2000
Parallel Cable Model:
•
A computer with a Parallel Port
•
DOS, Windows 95, 98 or NT
Hardware Installation
USB/Firewire Model:
1. Connect the 36-pin connector to the
drive until it is seated firlmly.
2. Connect the AC adapter into the DC
IN jack an the rear panel.
3. Plug the AC adapter into a working
outlet.
4. Continue with the Software Installation.
PCMCIA Model:
1. Before you begin power off your PC system
2. Connect the 36-pin connector to the Slim drive until it is firmly
seated, then tighten the screws.
3. Locate the PCMCIA slot on your computer and insert the PC card
into it. (Note: The PC card is keyed for proper instertion—the arrow
should be pointing toward the computer,
facing upward.
4. Power on your PC and the Slim drive by
either the AC adapter or your
notebook’s batteries.
5. Continue with the Software Installation.
Parallel Cable Model:
1. Before you begin power OFF your PC system.