beautypg.com

EXP Computer ThinCD User Manual

Page 15

background image

- 15 -

SOFTWARE INSTALLATION FOR WINDOWS NT

Before You Begin

Be sure the Windows NT you are to install is version 3.51 or higher.

Since Windows NT does not support the “Hot Insert/Remove” feature,
the Portable CD-ROM should be connected with your computer prior
to starting Windows NT. Likewise, do not remove the Portable CD-
ROM before you shut down Windows NT.

In Windows NT, the I/O and IRQ settings of Portable CD-ROM can
not be changed. Therefore, if the settings conflict with other devices
you are using, change the I/O or IRQ of other device to avoid
conflicts.

Installing the PCMCIA CD-ROM under Windows NT

In Windows NT 4.0, you may select “Control Panel” under “Settings” from
the “Start” menu to open the “Control Panel” folder. double click the
“SCSI Adapter” icon)

Click “Drivers” tab, and a figure illustrated as below will be displayed.