EXP Computer ThinCD - Manual (Page 11)

- 11 -
Windows 95 (B)
If the “Update Device Driver Wizard” dialog box appears as below, it
means your Windows 95 is version 4.00.950B, i.e. OSR 2.
In this case, perform the following steps for installing the Portable CD-
ROM under Windows 95. Otherwise, ignore and skip this section and read
the next section for installing the PCMCIA CD-ROM for Windows 95.
(Older version)
1. Insert the Portable CD-ROM device driver disk into your floppy drive.
2. Click the Next button.
3. Click the Finish button. All the remaining installations will then proceed
automatically.
Please note that it is not necessary to connect the PCMCIA card every time
you reboot your computer; connect it only when you need to use it.