EXP Computer MIDI Traveler, Game Traveler, and Game Traveler Plus - Manual (Page 15)

15
1. Open "My Computer", double click "Floppy A", then "WinNt" folder
2. Right click on expgame.inf and select Install
3. Restart when prompted
USING AN EXTERNAL MIDI DEVICE (FOR GAME TRAVELER
PLUS/MIDI TRAVELER CARD MODEL ONLY)
You should have a MIDI Cable for you to connect the GAME TRAVELER
PLUS/MIDI TRAVELER Card with the external MIDI device—MIDI
keyboard, for example. When connecting the MIDI Cable, be sure the Cable
MIDI OUT is connected with the MIDI IN jack of the MIDI device, and the
Cable MIDI IN with the MIDI OUT of the MIDI device.
MIDI DEVICE
M IDI OUT
C ABLE MIDI IN
C ABLE MIDI OUT
M IDI CABLE
G A M E / M I D I P C C A R
D
M IDI IN
When you are using “PCMCIA GAME/MIDI - Joystick and MIDI” model,
both MIDI IN/MIDI OUT functions are supported. To use the MIDI
software CakeWalk, for example, you should choose the proper MIDI
device. Select “PCMCIA MPU MIDI In” as the MIDI input port and
“PCMIA MPU MIDI Out” as the MIDI output port as the below figure
illustrates.