EXP Computer EXP Sound card - Manual (Page 12)

- 9 -
SOFTWARE INSTALLATION FOR DOS/WINDOW 3.11
Take note that this section describes the installation of the PCMCIA Sound
device driver only. To install the Windows Sound Application you have to
refer to the Audio Applications USER
’S GUIDE that comes with this unit after
completing the installation of the PCMCIA Sound device driver.
AUTOMATIC INSTALLATION
The device driver installation programs provide an INSTALL program to help
you to install the device driver into the computer easily. Please follow the
instructions below to proceed with the automatic installation.
1. Insert the device driver diskette into a floppy disk drive on your
computer.
2. Change the working directory to the floppy drive containing the device
driver diskette by typing “A:” or “B:” then press ENTER.
3. At the DOS prompt (A:\> or B:\>), type “ INSTALL ” followed by the
ENTER key.
4. Press ENTER or click on the OK button to continue when the opening
screen appears. A dialog box will be displayed for you to specify 1) the
directory to place the device driver; 2) the I/O port and 3) the IRQ
desired for the PCMCIA Sound Module. Enter the directory you select
to install the driver and press the TAB key to set the I/O port and then
the IRQ. The default setting of the I/O ports are 220-22F, and the
default IRQ is 10. After completing the selection, click on Install button
to continue.