EXP Computer AudioDrive Ver. 3.0 - Manual (Page 31)

Audio Applications 3.0 User Guide
_________________________________________________________________________
_________________________________________________________________________
The Audio Recorder Page 25
To move or copy an audio section:
1. Select the waveform of the audio to be moved or copied.
2. Click the Cut button to erase the selected audio and place it on the
Clipboard, or click the Copy button to leave the selected audio as is while
copying it to the Clipboard.
3. Place the cursor where you want the Clipboard material to appear and
click the Paste button.
To record new audio and place it on the Clipboard:
1. Place the cursor at the end of the waveform, or play the file to the end.
2. With microphones or other input sources ready, click the Record button
to record new material. Click the Stop button to finish.
3. Use the mouse to select the section just recorded, then click the Cut or
Copy button to put that audio section onto the Clipboard.
To insert audio from the Clipboard:
1. Place the cursor at the point in the waveform where you want to insert
audio from the Clipboard.
2. Click the Paste button. The Clipboard audio waveform appears at the
cursor. No audio is erased.
To replace the selected audio with Clipboard audio:
1. Use the mouse to select the waveform of the audio to be replaced.
2. Click the Paste button. The Clipboard audio appears in place of the
selected audio.