Acer 220 Series - Manual (Page 48)

2 Customizing my computer 40
Installing memory
Follow these steps to install memory:
1 Turn off the computer, unplug the AC adapter (if connected) and
remove the battery pack. Then turn the computer over to access
its base.
2 Remove the screw from the memory cover (a); then lift up and
remove the memory cover (b).
3 Insert the memory module diagonally into the slot (a), then gently
press it down until it clicks into place (b).
4 Replace the memory cover and secure it with the screw.
The computer automatically detects and reconfigures the total
memory size.
220.book Page 40 Tuesday, October 23, 2001 10:54 AM