Ｎｅｔｄｖｒ – eLine Technology PRO3 User Manual User Manual

Page 29

Ｎｅｔ　ＤＶＲ

System Setup

General Setting

1. Host name, Open remote control lock, Host id; 2. Video standard: PAL/NTSC;

3. Resolution: 1024*768, 1280*1024, 1440*900, 1920*1080;

4. Language: English; 5. Display device: VGA/CVBS;

6. Auto lock: 1-10 minutes can be chose or close;

7. Audio device: microphone, sound pick-up;

Choose device when booting up; 9. Display power on wizzard.

Time Setting

1. Time setting: edit the time by manual,

Time mode switching (12hour mode/24hour mode) and DST setting;

2. NTP: update the time by manual/auto through network and NTP server.

Output Setting

Channel setting

1. Set the channel name;

2. Set video mask area and special area;

3. Video adjustment: Brightness, Contrast, Saturation, Hue;

4. Set the channel name position of each channel;

5. Channel copy function.

OSD

Date format setup, time, channel name, temperature display position.

Sequence Setting

Sequence cruise channels, polling interval, sequence cruise type.

SPOT Setting

Enable sequence, set sequence cycle and sequence channel etc.

COM Setting

COM number, COM device, Baudrate, Date bit, Stop bit, Parity bit, stream control, ATM protocol.

eLineTechnology.com