Product description, Safety information, Features – eLine Technology EVC User Manual User Manual
Page 3: Models

CAMERA ELI‐EVC / ELI‐EEVC USER MANUAL
eLineTechnology.com
Page | 3
Product Description
Indoor/Outdoor IR Vandal Dome
Congratulations on your purchase of this product. This analog surveillance dome features advanced
functions in a compact body and is suited for tight, indoor or outdoor environments. The camera utilizes
advanced Sony image sensor technology producing high definition, realistic color.
Features
Indoor/outdoor vandal dome housing
Infrared LEDs for night vision, 20M to 30M range (model dependent)
3‐Axis bracket for versatile positioning of the lens
12V DC
Additional features based on model
Models
Model Number
Resolution
Lens
Features
ELI‐EVC‐48‐4IR
480 TVL
3.6mm Fixed
20M IR Range, Low
Illumination
ELI‐EVC‐60‐4IR
600 TVL
3.6mm Fixed
20M IR Range, Low
Illumination,
DWDR,
OSD, DNR
ELI‐EVC‐65‐312IR
650 TVL
2.8~12mm Varifocal
30M IR Range, Low
Illumination,
DWDR,
OSD, 3D DNR, Sense-
UP
Safety Information
1. Read these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Clean only with dry cloth.
5. Do not block any ventilation openings.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus including amplifiers)
that produce heat.
7. Only use attachments/accessories specified by the manufacturer.
8. Pay attention to the power requirements.
9. Stop operation immediately when something is wrong with the product. If smoke or the smell of smoke comes from
the product, continued use will result in fire, injury, or damage to the product.
10. Turn the power off immediately and contact qualified service personnel for service.
11. Be sure to turn off the power before wiring. Failure to observe this may cause electric shock. A short circuit or wrong
wiring may cause fire
12. This product has no power switch. Turn the power off when cleaning the product.
13. When continuously viewing a bright light source such as a spotlight, the color filter of the CCD may have deteriorated
and it may cause discoloration. Even when changing the fixed viewing direction after continuously viewing a spotlight
for a certain period, the discoloration may remain.