eLine Technology ECO3 User Manual - Manual (Page 45)

45
Net DVR
4.5.4 Email Setup
After login, click “main menu”-> “alarm setup”-> “email setup” ,the interface is as follows:
Email setup steps:
(1) Enable the Email upload, select the related email. When alarm(video lost, motion detect, sensor detect) triggered, the DVR will send email to
user mail account automatically.
(2) Set the SMTP server, default is smtp.126.com.
(3) Input the username and password of the mail account.
(4) Input the mail address which applied from SMTP server in the “sender email”.
(5) Input the receiver mail box which can be multiple and separated by
“;”, the maximum length of the letter you input is 256 bit.
(6) Default port is 25,nomally do not need to change.
(7) Set the e-mail upload interval time, that is the time interval for
upload alarm information to the target email, no matter how many times
alarm triggered, it just upload once during every interval time, and also can
be uploaded a snapshot which is .jpg in default.
(8) After saved the setting, the receiver mailbox will get the alarm
information mail when alarm is triggered.
Note: If mail unable to send, please check whether DVR can access internet,
or the mail server can work well.