eLine Technology HDSDI-HDMI - Manual

212
Service
If there is any problem in the product, please refer servicing to a supplier or a distributor with qualified service personnel.
System Dimension Diagram
Connector Wiring
HD-SDI In/Out and HDMI In/Out Connections
Connect a ‘HD-SDI OUT’ of HD-SDI device to ‘HD-SDI IN’ of HSC 1200 using by 75ohm coaxial cable
Connect a ‘HDMI OUT’ of HSC 1200 to ‘HDMI IN’ of device with HDMI output using by HDMI cable’
Video Component Input
If users wish to link video component input (e.g. Divx, etc), assure that video component input and “COMPONENT IN”
connections are connected properly with same colors.
Power Supply Connections
Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another
side to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
Cable
75 ohm coaxial cable
HDMI cable
VGA cable
NOTE
The cables above are not included in the package.