eLine Technology ECO3 User Manual - Manual (Page 44)

44
User Manual
4.5.3 Alarm Output
After login,through “Alarm setup”-> “Alarm output” continuous operations to enter Alarm output interface.The interface is as follows:
The “Alarm output” interface have the following options: Sensor type,Alarm to full-screen,Alarm to Buzzer,Audio Alarm,Alarm output Time,
Alarm output deployment time.
 Sensor type: normal on/off.
 Alarm to full-screen: when the system is in multi-picture and the alarm is triggered, the alarm chan nel will auto full-screen.
 Alarm to buzzer: when the alarm is triggered,the system will start buzzing.
 Audio alarm: when the alarm is triggered, the alarm sound will output to
the audio output.
 Alarm output time: inspection(2~300s),the system default is 30s.
 Alarm deployment time: the system default alarm output schedule time
is 00:00-23:59 of everyday.