DE DIETRICH VIVADENS MCR-P 24_28 BIC - Manual (Page 13)

4.2 Changing the settings
4.2.1. Changing the heating temperature
If an outside temperature sensor or an OpenTherm control
system is fitted, the heating flow temperature is adjusted
automatically.
In summer, it is possible to reduce the heating flow temperature whilst
maintaining comfort. To do this, proceed as follows:
1. Press the D key.
The symbol D and the current temperature are displayed.
2. Use the [+] and [-] keys to change the parameter value.
3. To confirm the new value, press the key S.
It also possible to modify this setting using the parameter
p1.
¼See chapter: "Other settings", page 15.
4.2.2. Modifying the comfort setting (ECO)
The user can consult or modify the following 3 settings:
4
ON = Activation of the energy-saving setting.
4
OFF = Activation of the comfort setting.
4
AUTO = Setting dependent on the control unit (Factory setting).
1. Press the f key 1 times. The symbol Q flashes.
2. Press the f key a second time. The symbol ECO flashes.
3. To confirm, press the S key.
4. The current operating status is shown on the display:AUTO.
5. Use the + and - keys to change the parameter value.
6. To confirm, press the S key.
7. Press the > key 2 times to return to the current operating
mode.
It also possible to modify this setting using the parameter
p4
. ¼See chapter: "Other settings", page 15.
T000147-A
("
)'
Ajj
2x
T000148-B
MCR-P 24/28 BIC 4. Operating the appliance
060513 - 127686-01 12