DE DIETRICH AD281 - Manual (Page 14)

3.3 Changing the settings
3.3.1. Setting the set point temperatures
To set the various heating, DHW and swimming pool temperatures,
proceed as follows:
1. Press the C key.
2. To select the desired parameter, turn the rotary button.
3. To modify the parameter, press the rotary button.
To go back to the previous display, press the key j.
4. To modify the parameter, turn the rotary button.
5. To confirm, press the rotary button.
To cancel, press key h.
Menu C
Parameter Adjustment range Description Factory setting
DAY TEMP. B (1) 5 to 30 °C Desired room temperature in comfort periods on circuit B 20 °C
NIGHT TEMP. B
(1)
5 to 30 °C Desired room temperature in reduced periods on circuit B 16 °C
DAY TEMP. C (1) 5 to 30 °C Desired room temperature in comfort periods on circuit C 20 °C
NIGHT TEMP. C
(1)
5 to 30 °C Desired room temperature in reduced periods on circuit B 16 °C
TEMP.SOL.TANK
(1)
20 to 80 °C Maximum load temperature of the tank's solar zone 60°C
WATER TEMP.
(1) 10 to 80 °C Desired domestic hot water temperature in the DHW circuit 55 °C
TEMP.TANK AUX
(1)
10 to 80 °C Desired domestic hot water temperature in the auxiliary circuit 55 °C
SWIMMING P.T.B
(1)
5 to 39 °C Desired temperature for swimming pool B 20 °C
SWIMMING P.T.C
(1)
5 to 39 °C Desired temperature for swimming pool C 20 °C
(1) The parameter is only displayed for the options, circuits or sensors actually connected.
MODE
C002266-A
3. Operating the appliance VM iSystem
13 17/11/2011 - 300028026-001-A