DE DIETRICH ALEZIO AWHP MIV-II - Manual (Page 16)

2. The symbol Q flashes.
Press the S key.
3. The information SERVICE flashes for 5 seconds.
If no buttons are pressed for 10 seconds, the screen goes back to
the main display.
To stay in the Information menu, press the S button, the
information SERVICE no longer flashes.
4. Use the - and + keys to scroll through the information.
5. Press the key > to exit the menu.
4.2.1. Reading out measured values
Parameter Description Unit
t1 :
4
In heating mode: Heating flow set point temperature
4
In DHW mode: DHW setpoint temperature
4
In cooling mode: Cooling setpoint temperature
4 In swimming pool mode: Pool set temperature
°C
t2 : Measured start temperature °C
t2 : Domestic hot water temperature measured °C
t2 : Outside temperature measured °C
lt : Water flow Litres/minute
S;ft Software version
4.2.2. Energy consumption display
Parameter Description Unit
c1 : Estimated consumption of electrical energy in heating mode (1) kWh
c2 : Estimated consumption of electrical energy in DHW mode (1) kWh
c3 : Estimated consumption of electrical energy in cooling mode (1)
(2)
kWh
(1) Display available if the estimated electrical energy consumption function is activated
(2) Cooling mode must be enabled
M002247-C
M002278-C
M002248-C
4. Operating the appliance AWHP MIV-II
15 23/04/2013 - 300023321-001-03