Asus A7V8X-MXSE - Manual (Page 57)

ASUS A7V8X-MX SE motherboard user guide 2-27
APIC Mode [Enabled]
When enabled, this option allows you to distribute interrupt routings other than the
16 IRQs. The Programmable Interrupt Controller (PIC) setting allows you to use
the 16 IRQs only. Configuration options: [Enabled] [Disabled]
2.8 Exit menu
Save & Exit Setup
Exit Without Saving
Load Optimized Defaults
Discard Changes
Save Changes
F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults
ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit
Select Menu
Item Specific Help
This option saves data
to CMOS and exits the
BIOS setup.
Save & Exit Setup
Once you are finished making your selections, choose this option from the Exit
menu to ensure the values you selected are saved to the CMOS RAM. The CMOS
RAM is sustained by an onboard backup battery and stays on even when the PC is
turned off. When you select this option, a confirmation window appears. Select
[Yes] to save changes and exit.
Exit Without Saving
Select this option only if you do not want to save the changes that you made to the
Setup program. If you made changes to fields other than system date, system
time, and password, the BIOS asks for a confirmation before exiting.
Load Optimized Defaults
This option allows you to load the optimized values for each of the parameters on
the Setup menus. When you select this option or if you press , a confirmation
window appears. Select [Yes] to load optimized values. Select Save & Exit or make
other changes before saving the values to the non-volatile RAM.