Asus A7V8X-MXSE - Manual (Page 52)

2-22 Chapter 2: BIOS information
2.6 Power menu
ACPI Suspend Mode [S1&S3]
Allows you to select the ACPI state to used for system suspend.
Configuration options: [S1 (POS)] [S3 (STR)] [S1 & S3]
Power Management [User Define]
Configuration options: [USer Define] [Min Saving] [Max Saving]
HDD Power Down [Disabled]
Shuts down any IDE hard disk drives in the system after a period of inactivity as
set in this user-configurable field. This feature does not affect SCSI hard drives.
Configuration options: [1Min]...[15Min]
Suspend Mode [Disabled]
Sets the time period before the system goes into suspend mode.
Configuration options: [1Min] [2Min] [4Min] [6Min] [8Min] [10Min] [20Min] [30Min]
[40Min] [1Hour]
Video Off Option [Suspend -> Off ]
This field determines when to activate the video off feature for monitor power
management. Configuration options: [Always On] [Suspend -> Off]
AC Loss Auto Restart [Auto]
This allows you to set whether or not to reboot the system after AC power loss.
[Off] leaves your system off while [On] reboots the system. [Auto] sets the system
back to the state it was before the power interruption.
Configuration options: [Auto] [On] [Off]
ACPI Suspend Type [S1&S3]
Power Management [User Define]
HDD Power Down [Disabled]
Suspend Mode [Disabled]
Video-off Option [Suspend -> Off]
AC Loss Auto Restart [Auto]
Video Off Method [V/H SYNC+Blank]
C.O.P. Control [85 degree]
PWR Button < 4 Sec [Instant-off]
Power Up Control
Hardware Monitor
F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults
ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit
Select Menu
Item Specific Help
Select the ACPI state
used for System
Suspend.