Asus A7V8X-MXSE - Manual (Page 17)

ASUS A7V8X-MX SE motherboard user guide 1-9
1.7 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
A7V8X-MX SE
®
A7V8X-MX SE Onboard LED
SB_PWR
ON
Standby
Power
OFF
Powered
Off
1. Unplug the power cord from the wall socket before touching any
component.
2. Use a grounded wrist strap or touch a safely grounded object or to a metal
object, such as the power supply case, before handling components to
avoid damaging them due to static electricity.
3. Avoid touching the ICs on components.
4. Whenever you uninstall any component, place it on a grounded antistatic
pad or in the bag that came with the component.
5. Before you install or remove any component, ensure that the ATX
power supply is switched off or the power cord is detached from the
power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
Onboard LED
The A7V8X-MX SE motherboard comes with a standby power LED. When lit, this
green LED (SB_PWR) indicates that the system is ON, in sleep mode, or in soft-off
mode, a reminder that you should shut down the system and unplug the power cable
before removing or plugging in any motherboard component.