Asus A7V8X-MXSE - Manual (Page 42)

2-12 Chapter 2: BIOS information
2.5 Advanced menu
Sector
This field configures the number of sectors per track. Refer to the drive
documentation to determine the correct value. To make changes to this field, set
the Type field to [User Type HDD] and the Translation Method field to [Manual].
Transfer Mode
This field selects the UDMA transfer mode. Configuration options: [Auto] [UDMA0]
[UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
CPU Type AMD Athlon(tm)
CPU Speed 1050MHz/280MHz
Cache RAM 256K
Current FSB Frequency 133MHz
Current DRAM Frequency 166MHz
DRAM Clock [ By SPD ]
External Cache [Enabled]
PS/2 Mouse Function Control [Enabled]
USB Legacy Support
[Auto]
Chip Configuration
I/O Device Configuration
PCI Configuration
F1 : Help ↑↓ : Select Item -/+ : Change Value F5 : Setup Defaults
ESC : Exit →← : Select Menu Enter : Select Sub-menu F10 : Save and Exit
Select Menu
Item Specific Help
Press [Enter] to select
the DRAM clock.
The Advanced menu displays the CPU type, speed, cache RAM, front side bus
frequency and DRAM frequency information. It also contains the following BIOS
parameters.
DRAM Clock [By SPD]
The DRAM clock are set according to the DRAM SPD (Serial Presence Detect).
You can manually set the DRAM clock parameters.
Configuration options: [By SPD] [133] [166]
External Cache [Enabled]
These fields allow you enable or disable the built-in CPU internal and external
cache. Configuration options: [Enabled] [Disabled]
PS/2 Mouse Function Control [Enabled]
Setting this option to Enabled allows the operating system to determine whether to
enable or disable the mouse. Set to Disabled prevents any installed PS/2 mouse
from functioning and frees up IRQ 12. Configuration options: [Enabled] [Disabled]