Datamax-O'Neil M-Class Mark II DMXNet III Card Option - Manual (Page 11)

P r i n t e r ’ s I n t e r n a l W e b P a g e s 9
GENERIC NETWORK CONFIGURATION Page
NETWORK INTERFACE
NETWORK INTERFACE Selects WIRED ETHERNET (802.3) or WIRELESS ETHERNET (WIFI 802.11)
WIFI OPTION TYPE
WIFI OPTION TYPE Selects which model of the communication card. This setting must match the model
installed in the printer; DMXrfNet2 or DMXrfNet3. The model of the card is shown in the
upper right hand corner of the cards mounting plate.
NET BIOS SERVICES
ENABLED/DISABLED Enables or disables the NET BIOS SERVICES
NETBIOS NAME Is the name used to reference the printer instead of the IP address. A WINS or DNS
server is required for this capability.
PRIMARY WINS SERVER The IP address of the primary WINS Server.
SECONDARY WINS SERVER The IP address of a secondary WINS Server.
TCP PRINT SERVICES
TCP PRINT SERVICES Selects the Port to use for all network communications; Default is 9100
LPD PRINT SERVICES
LPD PRINT SERVICES Enables or disables the LPD SERVICES
SNMP SERVICES
ENABLED/DISABLED Enables or disables the SNMP SERVICES
Allows management protocols, where:
ENABLED = Sends messages to SNMP-compliant devices.
DISABLED = Sends no messages.
SNMP SERVER ADDRESS Is the address in standard octet format for SNMP services.
SNMP TRAP ADDRESS Is the address in standard octet format where SNMP traps will be sent when SNMP service
is installed on your receiver. When zeroed, no traps are sent.
TELNET SERVICES
ENABLED/DISABLED Enables or disables Telnet protocol to transfer data.
FTP SERVICES
ENABLED/DISABLED Enables or disables FTP protocol to transfer data.
HTTP (WWW) SERVICES
ENABLED/DISABLED Enables or Disables the HTTP SERVICES.
NETCENTER SERVICES
ENABLED/DISABLED Enables or Disables the NETCENTER SERVICES.
GRATUITOUS ARP
GRATUITOUS ARP Sets time interval for ARP transmission packets, where:
(0-2048 minutes); Default is 0 (Disabled)