Datamax-O'Neil I-Class Quick Start Guide - Manual (Page 2)

Be sure to follow and perform the suggested Cleaning Schedule listed in
the Operator's Manual.
For more information on custom programming or any of the topics
referred to in this guide, see the Operator's Manual and Programmer's
Manual on the CD-ROM provided.
Asegúrese de seguir y llevar a cabo el plan de limpieza recomendado
descrito en el Manual del operador.
Para obtener más información sobre la programación personalizada o
cualquiera de los temas expuestos en esta guía, consulte el Manual del
operador y el manual del programador que se encuentran en el CD-ROM
suministrado.
Befolgen Sie bitte genau den im Benutzerhandbuch empfohlenen
Reinigungsplan.
Weitere Hinweise zu benutzerspezifischen Einstellungen oder in dieser
Anleitung erwähnten Themen finden Sie im Benutzerhandbuch und im
Programmierhandbuch auf der mitgelieferten CD-ROM.
Veillez à effectuer les nettoyages selon l'échéancier prévu dans le Manuel de
l'utilisateur.
Se reporter au Manuel de l'utilisateur et au Manuel du programmeur fournis sur
le CD-ROM pour plus d'informations sur la programmation personnalisée ou
tout autre sujet abordé dans le présent document.
Assicurarsi che vengano eseguite regolarmente le procedure di pulizia secon-
do i tempi indicati nel manuale dell'operatore .
Per ulteriori informazioni sulla programmazione personalizzata o su qualsiasi
altro argomento contenuto in questa guida, consultare il manuale dell'operatore
ed il manuale del programmatore sul CD-ROM in dotazione.
92-2481-01 Rev. B
4
5
With the Printer On, and loaded with media (at least 4 inches wide):
Verify the printer is in the ‘Ready Mode’
Press the button.
Using the button scroll to ‘Print Config Label’. Press the
button again, after a brief hesitation the printer will print one
Configuration Label.
Ready Mode:
Pause: Toggles the pause condition.
Feed: The FEED button feeds a
label, and clears any faults
that have been corrected.
Cancel: Cancels a job and pauses the
printer.
Menu: Toggles between the ready
and menu mode.
Test: Enables the quick test mode,
see the Operators Manual
for additional information.
Menu Mode:
Arrow Up: Moves to the next item in the
menu tree, (increase values).
Arrow Down: Moves to the previous item in
the menu mode, (decrease
values).
Enter: Selects a displayed item or
value.
ESC: Moves to the previous menu
level.
Ready: On indicates ready, blinking
indicates menu mode.
Stop: On indicates paused state.
Error: On indicates a fault. To clear a fault
press the feed button.
Indicators: