Datamax-O'Neil E-Class Mark III Paper Menu - Manual (Page 5)

5
Navigating the Paper Menu
An item must be selected before it can be changed. Because the location within the Paper Menu structure
depends on the number of button presses and the amount of time between them, it is recommended that
button presses and pauses be noted before editing is attempted, at least until the system is completely
familiar.
To move through the menu:
Desired Effect Operator Action Printer’s Response
Move down one item Briefly press and release
the button Left LED flashes orange; focus moves one
item down the list.
Note: When selection mode is first entered,
the first button press selects menu Item 1.
Select item and enter
edit mode Wait 2 seconds LEDs light in sequence indicating currently
selected option; enters edit mode.
Edit the option Within 10 seconds, briefly
press and release button For each button press, cycles through
settings and LED states.
Exit edit mode, return
to selection mode
Wait 10 seconds Option setting is written to printer; printer
returns to selection mode at top of menu.
Left LED flashes green at 1 second intervals.
Make no changes,
return to selection
mode
Do not press button after
entering edit mode Option setting is unchanged; printer returns
to selection mode at top of menu. Left LED
flashes green at 1 second intervals.