Analog Way RKD8044-T - Manual (Page 8)

RKD8044-T
RKD8044-T
PAGE 8
Connecting one iX8044 & two Controllers - UDP SETUP
To control one iX8044 product with two external controllers thru a LAN connection, do the following UDP settings:
NOTE: Make sure to configure all of your connections in UDP mode.
In the "CONTROL" – "iX LAN SETUP" menu of the iX8044 configure the connection in UDP mode as described here
above.
Choose IP addresses according to the available addresses on your local network.
Now on each controller, configure the UDP connections as described here above.
Diventix 8044
Local address 192.168.0.10
Remote address 192.168.0.255
Local port 10500
Remote port 10500
Gateway 192.168.0.1
Netmask 255.255.255.0
LAN HUB
Controler #2
(ie AMX /CRESTRON )
Local address 192.168.0.16
Remote address 192.168.0.10
Local port 10500
Remote port 10500
Controler #1
RKD 8044-T
Local address 192.168.0.15
Remote address 192.168.0.10
Local port 10500
Remote port 10500
Straight Cables (Cat5 RJ 45)