Analog Way RKD8044-T - Manual (Page 5)

RKD8044-T
RKD8044-T
PAGE 5
E
N
G
L
IS
H RKD8044-T
Chapter 1 : INTRODUCTION
1-1. SUPPLIED EQUIPMENT
•
1 RKD8044-T Remote Console (RKD8044-T).
•
1 AC Power supply cord.
•
1 REMOTE cable (DB9 M/F) 3 m / 10 ft.
•
1 "UPDATE" cable (DB9 F/F) 1.8 m / 6 ft.
NOTE: Take care of this cable, it is essential for updating the RKD8044-T. (See Chapter 5 : UPDATING THE
RKD8044-T).
•
1 User's manual.
1-2. GENERAL INFORMATION
RKD8044-T enables to control the powerful iX range of Seamless Switchers: DIVENTIX 2
1-3. iX2 FAMILY REFERENCES
REFERENCES DESIGNATIONS
RKD8044-T RKD8044-T Remote Console with T Bar for controlling Diventix2
RKD8044 RKD8044 Remote Console for controlling Diventix2
DVX8044 Di-VentiX II ™ .
OPT-8044-VO Optional VIDEO output.
OPT-8044-A Optional AUDIO input/output.
CBD-8044 CROSS BLENDER ™ . Optional version for "Edge blending" application.
RCS 10142 Remote Control Software (Supplied)
AMS100 Axion Manager Show Control Software
ARC100 Axion Show Control Console
1-4. INSTALLATION
•
Table top mounting: The RKD8044-T can be used directly on a table: the unit is equipped with 4 plastic feet.
IMPORTANT:
••••
Be sure that no weight in excess of 2 kg (4.4 Lbs.) is added onto the RKD8044-T.
••••
The maximum ambient operating temperature must not exceed 40 °C (104 °F).
••••
The rack and all mounted equipment in it must be reliably grounded to national and
local electrical codes.
WARNING: ALWAYS SET THE T-BAR TO THE BOTTOM POSITION BEFORE SWITCHING ON OR
OFF THE RKD8044-T.