Analog Way Shot Box - LiveCore platform - Manual (Page 3)

RUNNING SHOT BOX FOR LIVECORE™ SERIES
DIAGRAM
Once your SB-80 Shot Box device detected and a connection to the LiveCore™ switcher
established, each individual key LED backlight will reflect the corresponding Master Preset
or Screen Preset availability on the system as well as the corresponding Monitoring Preset
availability.
The SB-80 Shot Box supports 140 Master Presets or 140 Screen Presets in total (2 pages
of 70 Master Presets or Screen Presets depending on your configuration) and 8 Monitoring
Presets (2 pages of 4 Monitoring Presets).
For more information about Master Presets, Screen Presets and Monitoring Presets, please
refer to your LiveCore™ product manual.
To switch from one page to the other (and vice versa), simply press the PAGE key on the
SB-80 Shot Box device. Blue backlighting indicates Page 1. Red backlighting indicates
Page 2. If a Master Preset or a Screen Preset key backlight is turned off, this means that
the corresponding Master Preset or Screen Preset memory is empty. If a Monitoring Preset
key backlight is turned off, this means that the corresponding Monitoring Preset memory
is empty.
To recall a Master Preset or a Screen Preset from memory into your Preview monitor, press
the corresponding key on your SB-80 Shot Box device. The key backlight starts blinking.
To recall a Monitoring Preset from memory, press the corresponding key on your SB-80 Shot
Box device.
To send the current Preview configuration to the Program output, press the TAKE key on the
SB-80 Shot Box device.
The Master Preset or Screen Preset key illuminates in contrasting color after the TAKE to
indicate that this preset has been selected on program.
WARNING!
Connect the Shot Box USB cable directly
to your computer - Do not connect the
Shot Box USB cable on the front of your
LiveCore™ series device.