American Dryer Corp. AD-120ES - Manual (Page 9)

113386 - 14 www.amdry.com 5
MAXIMUM CAPACITY (DRY WEIGHT) 120 lb 54.43 kg
TUMBLER DIAMETER 44-5/8” 113.35 cm
TUMBLER DEPTH 42-1/8” 107.00 cm
TUMBLER VOLUME 38.10 cu ft 1,078.87 L
TUMBLER/DRIVE MOTOR 3/4 hp 0.56 kW
BLOWER/FAN MOTOR 3 hp 2.24 kW
DOOR OPENING (DIAMETER) 31-3/8” 79.69 cm
DOOR SILL HEIGHT 25-7/8” 65.72 cm
WATER CONNECTION 3/4”-11.5 NH (North A meri ca)
3/4” B.S .P.T. (Outside North America)
DRYERS PER 20’/40’ CONTAINER 3 / 7
DRYERS PER 48’/53’ TRUCK 9 / 10
VOLTAGE AVAILABLE 208-575V 3ø 3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 1,440 lb 653.17 kg
APPROXIMATE SHIPPING WEIGHT 1,580 lb 716.67 kg
AIRFLOW 60 Hz 2,150 cfm 60.88 cmm
50 Hz 1,791 cfm 50.71 cmm
HEAT INPUT 375,000 B tu/hr 94,498 kcal/hr
EXHAUST CONNECTION (DIAMETER) 14” 35.56 cm
COMPRESSED AIR CONNECTION N / A
COMPRESSED AIR VOLUME N / A
INLET PIPE CONNECTION 1” F.N.P.T.
1” F.B.S.P.T. (C E and Australia Only)
VOLTAGE AVAILABLE 208-575V 3ø 3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 1,440 lb 653.17 kg
APPROXIMATE SHIPPING WEIGHT 1,580 lb 716.67 kg
AIRFLOW 60 Hz 2,150 cfm 60.88 cmm
50 Hz 1,791 cfm 50.71 cmm
EXHAUST CONNECTION (DIAMETER) 14” 35.56 cm
COMPRESSED AIR CONNECTION N / A
COMPRESSED AIR VOLUME N / A
OVEN SIZE
kW Btu/hr kcal/hr
72 245,700 61,900
75.6 258,000 65,000
VOLTAGE AVAILABLE 208-575V 3ø 3,4w 50/60 Hz
APPROXIMATE NET WEIGHT 1,735 lb 786.98 kg
APPROXIMATE SHIPPING WEIGHT 1,875 lb 850.48 kg
AIRFLOW 60 Hz 2,150 cfm 60.88 cmm
50 Hz 1,791 cfm 50.71 cmm
STEAM CONSUMPTION 450 lb/hr 204.12 kg /hr
OPERATING STEAM PRESSURE 125 psi max 8.62 bar, 862 kP a
EXHAUST CONNECTION (DIAMETER) 14” 35.56 cm
COMPRESSED AIR CONNECTION 1/4” Qui ck C onnecti on
COMPRESSED AIR VOLUME 4.25 cfh 0.12 cmh
BOILER HP (NORMAL LOAD) 13 B hp
SUPPLY CONNECTION 1-1/4” F.N.P.T.
RETURN CONNECTION 1-1/4” F.N.P.T.
Shaded areas are stated in metric equivalents 5/26/06
* Air-operated steam damper system must be provided with clean, dry, regulated 80 psi +/- 10 psi
(5.51 bar, 551 kPa +/- 0.69 bar, 68.94 kPa) air supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or obligation.
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Gas
Electric
Steam
*