Starting the camera, Power up, Connect to host application – ALLIED Vision Technologies AVT GigE Vision Cameras User Manual
Page 25: Power up connect to host application, See chapter
AVT GigE Cameras Installation Manual V1.0.1
25
Starting the camera
Starting the camera
Power up
A camera power adapter for each GigE camera is available from AVT. Please con-
sult the camera technical manual for connector definition and voltage specifi-
cations
Connect to host application
Use a Category 6 or higher rated Ethernet cable to connect the camera to the
host adapter. Crossover cabling is not required, but works—the camera has cir-
cuitry to determine if a crossover cable is being used.
www
AVT Product literature
Caution
For AVT Prosilica, Mako G, and Manta cameras
•
Use only DC power supplies with insulated cases.
•
Mako G, Manta, and Prosilica GT PoE models can source
power from:
– 802.3af (100 MBit/s and 1000 MBit/s), and
– 802.3at compliant PSE devices (Power Sourcing Equip-
ment): such as switches injectors or NICs
Caution
Bigeye G cameras
Operate Bigeye G cameras at 12 V (+ 5 %). The current is lim-
ited to max. 3.0 A. Operating Bigeye G cameras outside these
specifications may cause damage.
www
For more information on accessories go to: