Contemporary Research ICC1-232 RS-232 - Manual (Page 4)

Contemporary Research 4 ICC1-232 Manual
Physical
Size:
5.5" [140mm] wide x 1.1" [28mm] height x 3.4" [86mm] deep
Weight: 8 oz [226g]
Enclosure: All aluminum with durable black powder coat paint
Mounting: Mounts rear of TV
Rear Panel
RF In
‘F’, female, 75 ohm impedance, RF from CATV system, iCC-Net control
RF Out: ‘F’, female, 75 ohm impedance, RF to TV, less than -1.5 dbmV loss
Net LED: Green LED for iC-Net bus and DC power, flashes once per second if active
RS-232: DB-9 male connector, baud rates from 1200 to 115K baud
Optional CC-232 RS-232 available to match specific makes and models
Tx LED: Red LED lights when RS-232 information is sent
Rx LED: Yellow LED lights when RS-232 information is received
Power In: 2.1mm coaxial jack (inside center conductor positive), 75 mA maximum
11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
DIP Switches: Located on bottom of unit, sets RS-232 code operation and device number
iCC-Net
Operation:
1-way control, carried over the same RF coax connection as TV channels
Data Receive: Mid-band VHF, 74.7 MHz, sent from ICC-HE
-25 to +35 dBmV signal level
Includes
RF Loop cable, 18"
12 VDC power supply, 500 mA, (domestic US shipments only)
Mounting Velcro
Options
CC-232 RS-232 Control Cable (specify make, model, and length)
12 VDC power supply, 100 mA, (domestic US shipments only)
Mounting Brackets