Contemporary Research QMOD-HD TV One Integration User Manual
Page 5

Inserting the Channel
This is a fairly simple step if the site’s RF provider has already set up the system for inserting a channel. What he
needs to do is:
Specify a channel (2-135) cleared for insertion. This means they have added any filters needed to
eliminate any noise or existing channels at that frequency
Set and marked an F connector to be used for inserting. The max output of the QMOD-HD is 29 dBmV,
and the provider will include an RF booster amplifier if the signal needs to be higher to merge with the
other channels.
If that work has been completed, change the channel of the QMOD to the specified channel, then connect the
output to the provided RF input.
The client should then be able to re-scan the site’s TVs to add the new channel. If the TVs are LG, you can usually
manually enter the new channel using the remote. Just enter the channel # using the remote, and the set will
add the channel to the list after it successfully finds the channel. Most other brands need to re-scan.