CHIEF MAC119 - Manual (Page 7)

Installation Instructions MAC119
7
Figure 6
11. Place mount with wall plates (A) over anchors and align
mounting holes in wall plates (A) with holes in anchors.
(See Figure 7)
12. Place flat washer (C) onto Phillps pan head screw (E).
(See Figure 7)
13. Insert Phillips pan head capscrews (E) with flat washer (C)
through mounting hole in display mount and into anchor (M)
and tighten until flush against mount. DO NOT overtighten!
(See Figure 7)
WARNING: IMPROPER INSTALLATION CAN LEAD TO
EQUIPMENT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! Overtightening of
mounting hardware can damage the steel studs. DO NOT
overtighten mounting hardware!
Figure 7
14. Complete mount installation following the installation
instructions provided with the mount.
Plastic Straps
Steel Stud
Drywall
Anchor Metal Channel
Plastic Cap
SIDE VIEW
Steel Stud
Drywall
Anchor Metal Channel
(A) x 2
SIDE VIEW
(E) x 8
(C) x 8