CHIEF PAC124 - Manual

I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8807-000048
2006 Chief Manufacturing
www.chiefmfg.com
04/06
BEFORE YOU BEGIN
24" Stud Kit
Model: PAC-124
The Chief PAC-124 is used to extend the wood stud
mounting options of the Chief PDR, PNR and PWR,
MWR, and MWH series mounts out to 24" stud enters.
24"
WARNING: It is the installer’s responsibility to make sure all components are properly assembled and installed using
the instructions provided. Failure to read, thoroughly understand, and follow all instructions can result in serious
personal injury, damage to equipment, or voiding of factory warranty.
• If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.