CEMB USA C72_2SE (A) - Manual (Page 17)

I 0186 GB - 17
12/13 mm 12/13 mm
sx
g g
dx
50
sx
g g
dx
4 g 3 g 1 g 6 g
sx
g g
dx sx
g g
dx sx
g g
dx
5.4.4 - ALU AND STATIC MODES
From the Measurement screen, press button to select the type required. The 5-LED displays show
the position where to apply the weights. If a spin has already been performed, the processor automatically
recalculates, for each change of mode, the amounts of unbalance according to the new calculation.
Fig. 19
DYNAMIC Balancing steel or light alloy wheel rims by
applying clamp weights on the edge of the wheel rim.
STATICO The static mode is necessary for motorcycle wheels or
when it is not possible to place the counterweights on
both sides of the rim.
ALU - 1 Balancing of light alloy rims with application of adhesive
weights on the rim shoulders.
ALU - 2 Balancing of light alloy rims with hidden application of the
outer adhesive weight. Outer weight position is fi xed.
ALU - 3 Combined application: clip-on weight inside and hidden
adhesive weight on outside (Mercedes). Outer weight
position is the same as ALU-2.
ALU - 4 Combined application: adhesive weight outside and
clip-on weight inside.
5.4.5 - AUTOMATIC MINIMIZATION OF STATIC UNBALANCE
resting surface
This program is designed to improve the quality of balancing without any mental effort or loss of time by
the operator. In fact by using the normal commercially available weights, with pitch of 5 in every 5 g, and
by applying the two counterweights which a conventional wheel balancer rounds to the nearest value,
there could be a residual static unbalance of up to 4 g. The damage of such approximation is emphasized
by the fact that static unbalance is cause of most of disturbances on the vehicle. This new function,
resident in the machine, automatically indicates the optimum entity of the weights to be applied by
approximating them in an “intelligent” way according to their position in order to minimize residual static
unbalance.
Initial unbalance
phase shift
Possible approximations
residual static residual static residual static residual static