CEMB USA C29 User Manual - Manual (Page 6)

6
2
3
4
1
4
460
906
952
Use and maintenance manual Rev. 04-2010
ENGLISH
Technological description
2.1 PURPOSE
It is used to balance the wheels of cars, vans, 4-WD, mo-
torcycles and scooters weighing less than 75 Kg. It can be
operated in the temperature range of 0° to + 45°C.
The machine can oper ate only on fl at non resilient fl oor.
To lift the machine, lever only on the base where the 3
support points are located. never, under any circustance,
apply force to other points such as the spindle, head, or
accessory shelf. It functions properly without having to
fasten it to the floor with wheels weighing up to 35 kg; for
heavier wheels, fasten it at the points indicated. Do not
mount anything other than motorbike, car or truck tyres
on the wheel balancer.
Thanks to the new and exclusive VDD (Virtual Direct Drive)
system, reliable unbalance measurements can be made
in a short time, almost half the time of the cycle used with
respect to other balancers in this range.
The main features include:
direct selection of the metrical or Anglo-Saxon system ▪
machine settings menu. ▪
optimisation of tyre and rim unbalance. ▪
static programme, ALU / ALU “S” / SPLIT. ▪
automatic minimisation of static unbalance. ▪
2.2 TECHNICAL SPECIFICATIONS
The following data refers to the balancer in its standard
configuration.
Single phase power supply 115 or 230 V 50-60 Hz (see rating plate)
Protection class IP 54
Cycle time per wheel 4.7 seconds (5 3/4"x14") 15 Kg.
Balancing speed 100 min -1
Balancing accuracy 1 gram
Position resolution ± 1.4 °
Average noise < 70 dB(A)
Rim width settable 1.5" ÷ 20" or 40 ÷ 510 mm
Settable diameter 10" ÷ 30" or 265 ÷ 765 mm
2.3 DIMENSIONS AND WEIGHTS
The machine complete with flange weighs 110 kg.
2. Technological description
CONTROL PANEL 1.
LOCK NUT 2.
WEIGHT-TOOL HOLDER 3.
MANUAL GAUGE 4.