Introduction, Safety rules, 1 general – CEMB USA ER85 Installation Manual User Manual
Page 2: 2 symbols, English

ENGLISH
Installation manual Rev. 03-2012
2
1. Introduction
1.1 GENERAL
The machine has been constructed in conformity with the current EC Directives and the technical standards imple-
menting the requirements, as stated in the declaration of conformity issued by the manufacturer and attached to the
manual. This publication, hereinafter simply referred to as ‘manual’, contains all the information for safe installation
of the machine stated in the declaration of conformity.
This manual addresses operators previously instructed on the precautions to adopt when working in the presence of
electrical power and moving devices as well as on manual load handling which imposes that loads handled manually
may not exceed 30 kg for men and 20 kg for women. Should the weight of the wheels to be balanced exceed the per-
mitted limits, all our balancing machines can be supplied with a lift to facilitate tyre mounting/dismounting, as an option
or standard based on the model. The manual addresses operators instructed on the precautions to take in relation to
the presence of electric current and moving devices. This publication is intended for all ‘users’ who as far as within
their competence need to and/or are obliged to give instructions to others or operate on the machine themselves.
The original Italian text of this publication constitutes the only reference to resolve any interpretation controversies
related to the translation into the European Community languages.
This publication forms an integral part of the machine and must therefore be kept for future reference until final dis-
mantling and scrapping of the machine. For installation, startup and use of the machine, the user must comply with
2. Safety rules
2.1 GENERAL
NOTES
WARNING
B
EFORE
PERFORMING
ANY
OPERATION
ON
THE
MACHINE
,
CAREFULLY
READ
THROUGH
THE
ENTIRE
MANUAL
,
PAYING
PARTICULAR
ATTENTION
TO
THIS
CHAPTER
.
The machine has been designed and constructed in observance of the CE requirements taking into account normal
and reasonably foreseeable use.
The machine has been constructed for the application stated in the user manual attached hereto.
It is not permitted for any reason whatsoever to use the machine for purposes different from those for which it was
designed nor to use it in ways different from those described in this manual.
The various operations must be performed according to the criterion and the chronology described in this manual.
2.2 SYMBOLS
Throughout this manual dangerous operations are highlighted with graphic symbols to draw the reader’s attention.
The following graphic symbols are used:
WARNING
T
HIS
WARNING
INDICATES
POSSIBLE
OCCURRENCE
OF
AN
EVENT
THAT
MAY
LEAD
TO
SERIOUS
INJURY
OR
EXTENSIVE
DAMAGE
TO
THE
MACHINE
IF
ADEQUATE
PRECAUTIONARY
COUNTERMEASURES
ARE
NOT
TAKEN
.
the specific workplace legislation in force in the country where the machine is installed.
Safety rules