Hunter 99050, 99051,99052, 99053, 99054, 99055 Decorative Low Profile Integrated Kit - Manual (Page 6)

MA007-01 • 07/26/13
1.888.830.1326
6
Using the single pin connectors, connect
the black or blue wire from the fan to the
black wire from the light kit. Connect the
white wire from the fan to the white wire
from the light kit.
TYPE-B ASSEMBLY INSTRUCTIONS
Lift the light kit assembly up so that the
screw holes in the lower switch housing
line up with the holes in the upper switch
housing. Install the switch housing
screws and tighten securely.
Feed the wires through the center hole in
the switch housing, the washer, and the nut.
Then install the switch housing by twisting
clockwise onto the threaded rod. Install
the washer and nut onto threaded rod and
tighten securely.
1 2
4
Wire
Connector
Switch
Housing
Switch
Housing
Screw
If your fan does not have pin connectors
on the wires coming from the switch
housing, install the wiring harness
provided. Using the provided wire
connectors connect the white wire from
the fan to the white wire from the wire
harness and connect the black or blue
wire from the fan to the black wire from
the wire harness.
Do not allow the light kit to hang
only by the wire connections!”
3