Hunter 99050, 99051,99052, 99053, 99054, 99055 Decorative Low Profile Integrated Kit - Manual (Page 3)

MA007-01 • 07/26/13
1.888.830.1326
3
If your fan’s switch housing cap
resembles this one, remove the switch
housing screws using a Phillips head
screwdriver. Then remove the plug
button using a standard screwdriver.
Then follow the TYPE-B ASSEMBLY
INSTRUCTIONS on pages 6-7.
If your fan’s switch housing cap resembles
this one, remove the whole switch
housing by removing the switch housing
assembly screws with a Phillips head
screwdriver.Remove the plug button.
Then follow the TYPE-C ASSEMBLY
INSTRUCTIONS on pages 8-9.
If your fan’s switch housing cap
resembles this one, remove the cap
screws with a Phillips head screwdriver.
Then follow the TYPE-A ASSEMBLY
INSTRUCTIONS on pages 4-5.
Switch
Housing
Cap
Cap
Screw
WHICH ASSEMBLY METHOD WILL I USE?
Switch
Housing
Cap
Switch
Housing
Screw
Switch
Housing
Screw
Switch
Housing
Screw
Plug
Button
Plug
Button
Choose one of the four images below that most closely resembles the switch
housing on your fan; then follow the instructions under the image.
If your fan’s switch housing cap resembles
this one, remove the whole switch
housing by removing the switch housing
screws with a Phillips head screwdriver.
Remove the two cap screws from the
inside of the switch housing. Reinstall
the switch housing. Tighten the switch
housing screws.Then follow the TYPE-A
ASSEMBLY INSTRUCTIONS on pages 4-5.