ALESIS 03D - Manual (Page 220)

210
Chapter 17—Other Functions
03D—Owner’s Manual
Automix
Channel Controls
For the stereo input channel, the effects returns channels, and the stereo output, PAN
LEFT and PAN RIGHT set the balance, not pan.
If a pair of USER DEFINE buttons are set to PAN LEFT and PAN RIGHT, or PAN
FRONT and PAN REAR, pressing those buttons together sets the pan or balance to cen-
ter.
Others
User Define Button Indicators
Each USER DEFINE button has a LED indicator built-in. Operation of these indicators
depends on the selected function and is explained in the following table.
When a pair of USER DEFINE buttons are set to PAN LEFT and PAN RIGHT, or PAN
FRONT and PAN REAR, the indicators make it easy to check the pan position of the
# Function Description
18 Automix [REC] Same as REC switch on Main automix page
19 Automix [PLAY] Same as PLAY switch on Main automix page
20 Automix [STOP] Same as STOP switch on Main automix page
21 Automix [ABORT] Same as ABORT switch on Main automix page
# Function Description
22 CH Delay on/off Turn the selected channel’s delay on or off
23 EQ on/off Turn the selected channel’s EQ on or off
24 Dynamics on/off Turn the selected channel’s dynamics processor on or off
25 PAN Left Pan selected channel one step to the left
26 PAN Right Pan selected channel one step to the right
27 PAN Front Pan selected channel one step to the front (surround pan)
28 PAN Rear Pan selected channel one step to the rear (surround pan)
# Function Description
29 Peak Hold on/off Turn the meter Peak Hold function on or off
30 Oscillator on/off Turn the oscillator on or off
Function Type Indicator Operation
1 to 17, 21 Simple trigger Lights up momentarily when button is pressed.
19, 20, 22,
23, 24, 29,
30
ON/OFF oper-
ation
Lights up when the specified function is on.
18 Automix REC
Flashes in Rec Ready mode.
Lights up continuously during recording.
25 to 28 PAN
Lights up when the selected channel’s pan control is at cen-
ter or in the direction of the specified function. For exam-
ple, the indicator of a button set to PAN LEFT lights up
when the pan control is set anywhere from L16 to center.