ALESIS 03D - Manual (Page 150)

140
Chapter 13—Onboard Effects
03D—Owner’s Manual
DYNA.FILTER
DYNA.FLANGE
1. 6 ms–46.0 s fs=32 kHz/44.1 kHz, 5 ms–42.3 s fs=48 kHz
1. 0.02 ms–2.13 s fs=32 kHz/44.1 kHz, 0.02 ms–1.96 s fs=48 kHz
2. 6 ms–46.0 s fs=32 kHz/44.1 kHz, 5 ms–42.3 s fs=48 kHz
Parameter Range Description
SENSE 0–100 Input sensitivity.
TYPE LPF, HPF, BPF Select the filter type.
OFFSET 0–100 Filter frequency offset.
RESO. 0–20 Filter resonance.
DECAY 1 Decay time of the change in filter frequency.
DIR. Up, Down
Select whether the frequency will move upward (Up) or
downward (Down) in response to a high input level.
FREQ. 0.05–40.00 Hz LFO speed when the filter frequency is moved by the LFO.
DEPTH 0–100% Depth at which the LFO is applied.
PHASE 0.000–354.375˚ Left/right phase difference of the LFO.
LEVEL –40 to +6 dB Output level.
Parameter Range Description
SENSE 0–100 Input sensitivity.
FB.GAIN –99 to +99% Feedback amount.
OFFSET 0–100 Offset amount for the delay time.
LSF F 21 Hz–1.0 kHz Frequency of the low shelving filter.
LSF G –12 to +12 dB Gain of the low shelving filter.
DIR Up, Down
Select whether the resonant frequency will move upward
(Up) or downward (Down) in response to a high input
level.
EQ F 99 Hz–8.0 kHz Frequency of the parametric equalizer.
EQ G –12 to +12 dB Gain of the parametric equalizer.
HOLD 1 Hold time.
HSF F 500 Hz–16 kHz Frequency of the high shelving filter.
HSF G –12 to +12 dB Gain of the high shelving filter.
DECAY 2 Decay time.