American Panel HURRICHILL AP20BC175-2 - Manual (Page 20)

AP20BC175-2 Manual
19
l. To change the temperature, press or
then press .
60 Blinks
m. To change the temperature, press or
then press .
28 Blinks
n. To change the temperature, press or
then press .
35 Blinks
o. To change the temperature, press or
then press .
40 Blinks
p. To change the temperature, press or
then press .
35 Blinks
q. To change the temperature, press or
then press .
42 Blinks
The display will show:
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
BREAKING TEMP
60 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
LOW AIR TEMP PART 2
28 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
HIGH AIR TEMP PART 2
35 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
HARD FOOD TEMP.
40 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
HOLDING LOW TEMP.
35 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
HOLDING HIGH TEMP.
42 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
PROGRAMMING COMPLETE
DEFROST CYCLE PARAMETERS PROGRAMMING
After about 2 seconds the display will automatically
change to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
r. Press the button. The LED for "DEFROST"
will be steady "ON".
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE
The defrost type must be left AIR FLOW.
s. Press .
AIR FLOW
Blinks
PARAM. PROGRAMMING
DEFROST CYCLE
CHOOSE TYPE
AIR FLOW