American Panel HURRICHILL AP20BC175-2 - Manual (Page 19)

AP20BC175-2 Manual
18
d. To change the temperature, press or
then press .
28 Blinks
e. To change the temperature, press or
then press .
35 Blinks
f. To change the temperature, press or
then press .
40 Blinks
g. To change the temperature, press or
then press .
35 Blinks
h. To change the temperature, press or
then press .
42 Blinks
The display will show:
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
LOW AIR TEMPERATURE
28 °F
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
HIGH AIR TEMPERATURE
35 °F
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
FOOD TEMPERATURE
40 °F
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
HOLDING LOW TEMP.
35 °F
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
HOLDING HIGH TEMP.
42 °F
AUTOMATIC HARD CYCLE PARAMETERS PROGRAMMING
After about 2 seconds the display will automatically
change to:
The LED for "A" will be "ON".
The LED'S for cycles will be blinking.
i. Press the button. The LED for "HARD" will
be steady "ON".
j. To change the temperature, press or
then press .
10 Blinks
k. To change the temperature, press or
then press .
20 Blinks
PARAM. PROGRAMMING
AUTOMATIC MODE
CHOOSE
PROGRAMMING CYCLE
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
HIGH AIR TEMP PART 1
20 °F
PARAM. PROGRAMMING
AUTOMATIC HARD CYCLE
LOW AIR TEMP PART 1
10 °F
PARAM. PROGRAMMING
AUTOMATIC SOFT CYCLE
PROGRAMMING COMPLETE