Nilfisk-ALTO CONTROL60 - Manual (Page 9)

8
b. Store Preset
If confirmed, the new name will be shown in the left lower corner and in the preset field.
To return to the main menu, select RET and press.
With this function it's possible to change the EQ type.
c. EQ. Type
To load the preset. If the EQ is Dual Mono (DM), first choose the channel with the Channel key. It is very
important that the preset to be loaded belong to the same type (PAR ST, MN, etc) indicated in the upper
right corner to the window. If the user tries to load a different type or EMPTY preset, a warning "NO LOAD-
ING" will be shown. To return to main menu select the item RET and press
. ENTER
With this function the user can store a preset into one of the cations available to the user. This is 63 lo
the access screen.
In this window the user can find the position in which to save the current preset. With up/down it's possible
to select the item RET or the field preset; selected items are graphically reversed.
To save a preset the item Preset has to be selected, with the dial it's possible to choose the desired position
and lastly press
to save. ENTER
After saving the preset a string of characters will be shown, in which the user will edit the preset's name
(max. 8 characters). With Left/Right it's possible to move inside the string, the dial selects the blinking
char, Enter confirms, Esc cancels operation allowing to retain the old preset's name.