Inventory, Machine requirements – Castle TSM-21 Serial 61064 and lower (Mead) Operator Manual User Manual
Page 4

2
Inventory
With your Castle machine you should have received the following
:
Warranty Card (Please fill out & mail to Castle, Inc. to activate warranty)
TSM-21 Operator Manual and Parts Explosion
Two (2) PC 6902 Router Wrenches
One (1) PC 7301 Router Wrench
One (1) #2 x 6” Square Driver bit
Manual and Warranty Card for PC 6902 Router
Manual and Warranty Card for PC 7301 Router
Bit Gauge
Two Door Handle Assemblies
2- Door Springs
2- Bolt ¼-20
2- T-Handle
Machine Requirements
Important: Do not use an extension cord to power the TSM-21.
Power: 110 VAC, 20 Amp Circuit
Air Supply: 85 PSI minimum, 150 PSI maximum
Dust Collection: Although not absolutely necessary, the TSM-21 will function better with
proper dust collection attached. A vent for this purpose has been provided. If attaching
a dust collection system remove the cover plate over the vent opening in the back door.
Adding dust collection will keep the router motors cool and free from a buildup of
sawdust in order to prolong motor life.