Castle TSM-12 User Manual
Page 12
9.
Inspect each motor cord to verify that they are plugged into the duplex power outlet box
inside the machine and that they are clear of any moving parts. You may untie the main
machine power cord at this time. Verify the router bit is positioned at the center of the
cutout on the underside of the worktop (Fig 15). If it is not, refer to the Machine
Adjustments section “Pocket Hole Alignment” before proceeding. Place the machine on
your workbench right side up (Fig 16).
Fig 16
Fig 15
CASTLE, INC
TSM‐12 OWNERS MANUAL V1.0
Page 12 of 23