Kaiser С фронтальной загрузкой - Manual (Page 6)

2
2
1
1
3
4
5
INSTALLATION INSTRUCTIONS
The machine can be installed anywhere, provided the
temperature in the place of installation is not below +3º
C and the cables and hoses at the rear of the machine
are not crushed in any way.
For transport purposes the swinging unit in the machine
is blocked using 4 screws 1 with spacers 2. Before
starting the machine these spacers and lock screws
must be removed, and stored for use in the event of a
possible change of location.
Block off the holes with the plugs 3 provided, which can
be found in the bag containing the documents.
LEVELLING THE WASHING MACHINE
• After selecting a suitable position, level the
machine carefully using the adjustable feet 4.
• Particular care must be taken when selecting the
position, levelling the washing machine and
ensuring the safety of lock nuts 5.
If levelling is not carried out correctly, the washing
machine will be unstable and noisy during operation,
which may result in damage.
If the machine stands on a carpet floor, make sure that
air can circulate freely between the washing machine
and the floor itself.
Caution! If the spacers fall inside the machine,
open the rear panel, recover them and then place
the panel.
IMPORTANT!
Keep this brochure safe for further
using.
Before connecting the appliance
read these instructions carefully. Repairing the
failure arising from inappropriate connections or
use of the appliance is not covered by the
guarantee.
6
EN