Burke Flooring EcoFitness Rubber Sheet Rolls Installation - Manual

Installation Data
-- RESILIENT ATHLETIC FLOORING -- 09 65 66
Burke Flooring Products, a Division of Burke Industries
2250 South Tenth Street, San Jose CA 95112
(408) 297-3500 E: Burkeflooring.com
ECOFITNESS RUBBER SHEET ROLLS
INSTALLATION INSTRUCTIONS
RECOMMENDED TOOLS
Measuring Tape or Ruler
Metal Straight Edge
Utility Knife w/ extra blades (non-retractable is best)
White Marker or Chalk
Chalk line
2” x 4” Wood Block
Mallet
Cellophane, Masking, or Packaging Tape
Adhesive – BR-710 One Part Urethane
Mineral Spirits and Rag
Rubber Gloves
Trowel –
50-100# Roller
Seam Sealant & Commercial Grade Caulking Gun (optional)
UPON DELIVERY OF PRODUCT
1. VERIFY packing slip matches with product and order.
2. INSPECT delivered product thoroughly. Report any discrepancies of original
order, product defects, etc. No reimbursement/warranty claim will be given for
labor on material installed with visual defects. Any defects, size, color, or
otherwise, must be reported to the place of purchase prior to installation.
3. STORE product and adhesives in clean, dry, environment with temperatures
between 70 and 95F.
4. READ product information, installation instructions, and warranties completely
before starting any installation.
IMPORTANT NOTES – Do not use EcoFitness Rolls in conjunction with any
petroleum based products including solvents, adhesives, or sealers. Insure that
the products you use are not petroleum based. All substrates must be fully cured
(at least 60 days for concrete) before installing EcoFitness products.