Burke Flooring Resilient Oil and Grease (OGR) - Manual

Revision 1 - Released April, 2011 © Burke Flooring, A Division of Burke Industries
P R O D U C T S P E C I F I C A T I O N
Resilient Oil and Grease (OGR)
Resistant Rubber Floor Tile
1. PROPRIETARY PRODUCT/MANUFACTURER
1.1 Proprietary Product: Resilient Oil and Grease Resistant
(OGR) Rubber Floor Tiles - A.D.A. Compliant
1.2 Manufacturer:
Burke Flooring
2250 South Tenth Street
San Jose, California 95112
Phone: (800) 447-8442
(352) 357-4119
Fax: (352) 357-9660
Samples: Ext 1031
Web: www.burkeflooring.com
1.3 Proprietary Product Description:
1.3.1 Construction: Burke Oil and Grease Resistant Endura
Rubber Floor Tiles are manufactured from a homogeneous
composition of 100% synthetic rubber, high quality additives,
and colorants to meet the performance requirements of ASTM
F 1344, Class 1-A Standard Specification for Rubber Floor
Tile . This special rubber formulation contains oil and grease
additives to extend the performance in environments where
the product will be exposed to animal fats, vegetable oils, or
petroleum based materials (e.g.: commercial kitchens, garages,
oil change facilities, etc.). Burke rubber floor tiles require the
use of chair pads or chairs with casters designed for resilient
flooring in work stations or similar environments. Burke
rubber floor tiles are not warranted against cuts or lack of
protection under caster wheels designed for carpeting or other
types of flooring. Burke Rubber Floor Tiles are designed for
interior applications only.
1.3.2 Physical Characteristics:
OGR Square Raised Disk Pattern Rubber Floor Tile
(Solid Color):
Thickness: .125” (1/8”) (3.17 mm)
Disk Height: .025” (.635 mm)
Sizes: 36-1/4” x 36-1/4” (92 cm x 92 cm)
(palletized, covered & shrink-wrapped)
OGR Sculptured Surface Rubber Floor Tile
(Solid Color):
Thickness: .125” (1/8”) (3.17 mm)
Disk Height: N/A
Sizes: 36” x 36” (91.4 cm x 91.4 cm)
(palletized, covered & shrink-wrapped)
2. PRODUCT PERFORMANCE AND TECHNICAL
DATA
2.1 Hardness: ASTM D 2240: ≥ 85 Shore A
2.2 Abrasion Resistance: ASTM D 3389: < 1.0 gm loss
2.3 Slip Resistance: ASTM D 2047: COF ≥ 0.5
2.4 Color Heat Stability: ASTM F 1514: < 8.0 E
2.5 Static Load Limit: ASTM F 970: 250 PSI
2.6 Fire Resistance:
2.6.1 ASTM E 648/NFPA 253: Class 1
(Critical Radiant Flux)
2.6.2 ASTM E 662/NFPA 258: less than 450
(Smoke Density)
2.7 Chemical Resistance: ASTM F 925: Passed - 5% Acetic
acid, 70% Isopropyl alcohol, Sodium hydroxide solution
(5% NaOH), Hydrochloric acid solution (5% HCl), Sulfuric
acid solution (5% H2SO4), Household ammonia solution (5%
NH4OH), Household bleach (5.25% NaOCl), Disinfectant
cleaner (5% active phenol)